You can find the opening hours for the assembly and dismantling of your stand here.
Assembly and dismantling times
The assembly and dismantling of your stand at the PCIM Expo is possible at the following times:
Assembly
| Saturday, 3 May 2025 | 7 a.m. – 12 a.m. |
| Sunday, 4 May 2025 | 12 a.m. – 12 a.m. (24 hrs) |
| Monday, 5 May 2025 | 12 a.m. – 8 p.m. |
Please note that the exhibition hall must be vacated by 20:00 hrs on the last day of the assembly period to allow for cleaning.
Extended assembly
If required, an extended assembly can be requested for a fee by 4 April 2025 at the latest:
- Minimum stand size for an assembly period extension: 60 sqm
- Period: Friday 2 May 2025, 7 a.m. – 12 a.m. (extension available upon request, additional fee applies)
- Fee: 610 Euro per stand
If you are interested in the extended assemly, please contact NürnbergMesse at: pcim@nuernbergmesse.de
Dismantling
| Thursday, 8 May 2025 | 5 p.m. – 10 p.m. |
| Friday, 9 May 2025 | 7 a.m. – 12 a.m. |
Assembly and dismantling passes
Please note that in addition to your exhibitor passes, a assembly and dismantling pass must be generated for all persons staying on the Nuremberg exhibition grounds during assembly and dismantling and must be presented via the STP app of NürnbergMesse.
The required assembly and dismantling passes can be generated below:
If you have any questions, please contact sicherheitsmanagement@nuernbergmesse.de.
Further important information on assembly and dismantling
Please also note the instructions and guidelines for assembly and dismantling.
Please also note the instructions and guidelines for assembly and dismantling in this document starting on page 5.
Please also note that from this year on, booking time slots via the TransITfair system is mandatory for entering the loading yards at the exhibition grounds in Nuremberg.
