For the Direct Assembly  on Low-Inductance Bus Bars or Printed Circuit Boards

Capacitors in self-healing MKP technology for DC Applications in Power Electronics. The capacitors of our E61 series are housed in plastic case. Their special internal construction is optimized for very low self-inductance and high rms current ratings. Two terminals per pole are arranged in crosswise position to support the low-inductance connection of the capacitor itself as well as an optimum configuration of the connecting bus bar. Our design option P3 with solder pins can be mounted directly onto your printed circuit board.

 *The advantages of our E61 series:*

• Metallisation, dielectric system and internal layout of the E61 series are based on our renowned PK16 series with their *SecuMet* films.
• Round winding elements for homogeneous field conditions
• current ratings of up to 80 A rms per unit
• Special reduction of stray inductance Le by minimized connection paths: flat parallel screw terminals in cross arangement (design P5) for direct connection to sandwich bus bars; solder pins for direct integration into printed circuit boards; self- inductance between 15 and 25nH (depending on size)
• solid PUR filling, no mineral or synthetic oils: internal construction is environmentally sound and insensitive to shock and vibration
• flat base permits for mounting on a cooling plate/heat sink
• rated statistical lifetime 200,000 operating hours, with a rated failure rate of 50FIT (≙ failure rate 0.5%) as standard